|Main Functions and Benefits||Forged and hardened special steel.
Totally polished and varnished.
Used for base in plates to be restored or molded.
There are different shapes due to the various types of profiles and works that it can be used on.
Tools are produced and tested according to specific standards.
|Recommendations for Use||
Wear safety glasses, gloves and others safety equipments according to the job.
Never use a hammer with excessive wear, loose or damaged handle, burr or cracks on the head. Hammers with these problems must be replaced.
Never make any changes to the product like welding on the head or changing its handle.
Never strike two hammers, one against the other.
Always use the impact face for hit. Never strike anything with the sides of the hammer, as the hardening is just located on the impact faces.
Always observe the recommended use for each kind of hammer before use.
Always strike the hammer perpendicularly to the surface or work tool. It avoids the premature distortion of the impact face, as well as chipping.
Select the hammer that will hit the chisel or pin as follows: The impact face shall have a diameter 10mm bigger than the face to hit.
Store in clean and dry place.
|Warranty||Full warranty against manufacturing defects.|
* You can compare up to 4 products per category.
Com a Tramontina, você sempre conta com a melhor solução para seu negócio. Preencha o formulário e solicite seu orçamento.
TRAMONTINA PRO MODULAR STORAGE SYSTEMS: TAILOR MADE FURNITURE FOR MECHANICAL WORKSHOPS.
Telefone de contato: 0800 642 5565
Horário: 7:15 às 12:00 e das 13:00 às 17:00.