Industrial Tools

1.000 g Heavy duty tubular handle engineer's hammer

Code 40509002

The Tramontina PRO heavy duty engineer's hammer is ideal for performing different jobs with safety and practicality. With an exclusive forged head produced with chrome molybdenum steel and a strictly regulated heat treatment, the hammers have a hardened tubular handle fixed to the head with an elastic pin, thus eliminating the risk of the head accidentally detaching. The grip, produced with special materials and double injection, provides a better, ergonomic, comfortable grip. Submitted to rigorous quality and safety tests to ensure stamina, eliminating the possibility of head chipping even when used rigorously. All the quality and safety that you need when hammering.

Product features

Main Functions and Benefits Forged chrome molybdenum steel head.
Hardened carbon steel tube handle.
Hardening on the striking faces.
Polished and varnished bases.
Injected handle grip.
Head fixed by elastic pin.
ASME B107.54
DIN 6475
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking faces and peins to ensure a long life. Hardness tests are frequently carried out to guarantee the quality of the product.
In order to verify the material durability after the heat treatment, the hammers are also subjected to an impact test and analysed magnetically to detect any microscopic cracks, impact tests are also made so that magnetic particles can be analysed.
Suitable for heavy duty jobs.
In general it is used to break stones and concrete.
Its also used to strike chisels and for driving in stakes or wedges.
Tools are produced and tested according to specific standards.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Never use a hammer with excessive wear, loose or damaged handle, burr or cracks on the head. Hammers with these problems must be replaced.
Never make any changes to the product like welding on the head or changing its handle.
Never strike two hammers, one against the other.
Always use the impact face for hit. Never strike anything with the sides of the hammer, as the hardening is just located on the impact faces.
Always observe the recommended use for each kind of hammer before use.
Always strike the hammer perpendicularly to the surface or work tool. It avoids the premature distortion of the impact face, as well as chipping.
Select the hammer that will hit the chisel or pin as follows: The impact face shall have a diameter 10 mm bigger than the face to hit.
Store in clean and dry place.
Weight 1,48 kg
Dimensions
  • A: 42.5 mm
  • B: 40.0 mm
  • C: 100.0 mm
  • D: 260.0 mm