Industrial Tools

5.000 g Fiberglass handle enginner's hammer

Code 40721010

The Tramontina PRO engineer's hammer is ideal for performing different jobs with safety and practicality. With an exclusive forged head produced with special steel and a strictly regulated heat treatment, the hammers have a fiberglass handle fixed to the head with an elastic pin and epoxy. With sizes up to 2 kg, and a self-fixed handle for the sizes above 2 kg, thus eliminating the risk of the head accidentally detaching. The grip, produced with special materials and double injection, allows a better, ergonomic, comfortable grip. It is submitted to rigorous quality and safety tests to ensure stamina in order to eliminate the possibility of head chipping even when used rigorously. All the quality and safety that you need when hammering.

Product features

Main Functions and Benefits Forged chrome molybdenum steel head.
Hardening on the striking faces.
Polished and varnished bases.
PP coated fiberglass handle.
Injected grip.
Head fixed by epoxi and elastic pin.
DIN 6475.
The hammers are subjected to a specific hardening process to give a suitable hardness at the striking faces and peins to ensure a long life. Hardness tests are frequently carried out to guarantee the quality of the product.
In order to verify the material durability after the heat treatment, the hammers are also subjected to an impact test and analysed magnetically to detect any microscopic cracks, impact tests are also made so that magnetic particles can be analysed.
Suitable for heavy duty jobs.
In general it is used to break stones and concrete.
Its also used to strike chisels and for driving in stakes or wedges.
Tools are produced and tested according to specific standards.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Never use a hammer with excessive wear, loose or damaged handle, burr or cracks on the head. Hammers with these problems must be replaced.
Never make any changes to the product like welding on the head or changing its handle.
Never strike two hammers, one against the other.
Always use the impact face for hit. Never strike anything with the sides of the hammer, as the hardening is just located on the impact faces.
Always observe the recommended use for each kind of hammer before use.
Always strike the hammer perpendicularly to the surface or work tool. It avoids the premature distortion of the impact face, as well as chipping.
Select the hammer that will hit the chisel or pin as follows: The impact face shall have a diameter 10 mm bigger than the face to hit.
Store in clean and dry place.
Weight 5,94 kg
Dimensions
  • A: 160.0 mm
  • B: 800.0 mm
  • C: 68.0 mm
  • D: 70.5 mm