Industrial Tools

10'' Clamp tower

Code 44046125

The Tramontina PRO clamp tower is used to close clamps of constant velocity joints. Speed up your work with the Tramontina PRO automotive tools line.

Product features

Main Functions and Benefits Forged carbon especial steel.
Polished head edge.
Full hardening at the body.
Phosphated finishing.
Handles with special coating.
We test the durability of our pliers cutting edge using a specially designed machine.
The pliers have a different hardness at the cutting edge and at the body.
Closing clamps of homokinetic joints.
Tools are produced and tested according to specific standards.
Recommendations for Use Wear safety glasses, gloves and others safety equipments according to the job.
Always use the correct type of pliers for the job. Never use pliers to cut hardened wires, unless they are designed for this purpose.
Never use pliers as a hammer. It can crack or even break.
Never expose pliers to excessive heat. It can change the heat treatment applied at the cutting edges and reduce the performance of the tools.
Always ensure that the pliers are perpendicular to the wire for a quicker and safer operation.
Use isulated pliers identified on the grip with the marking 1.000 V when be necessary to work in places with electricity. Important: inspect the electrical insulation on a regular basis, if the insulated grip becomes cracked, you must stop using the pliers immediately.
Never increase the length of the pliers handles. It increases the load applied on the tool and can break it.
Never use the pliers on nuts or screws. For this kind of job it?s better to use a wrench or spanner.
Oil the joint occasionally as this will extend the life of the tools and improve their use.
Keep pliers out of the reach of children.
Store in a clean and dry place.
Weight 0,42 kg
Warranty Full warranty against manufacturing defects.
Dimensões
  • A: 36.0 mm
  • B: 250.0 mm
  • C: 16.0 mm
  • D: 49.0 mm
  • E: 23.5 mm