The Tramontina PRO IEC 60900 insulated tool line offers total safety for those who work with electricity. Recommended for activities of low voltage up to 1000 volts on alternating currents and 1500 volts on direct current. The tools follow the requirements of the IEC 60900 international standard (equivalent to the EN 60900 European standard). The line offers a complete line from combination and open end wrenches, ring spanners, adjustable wrenches, sockets and accessories, pliers, screwdrivers and nut drivers, mini hacksaws, cable strippers, and tool cases. To ensure total security for users, Tramontina tests 100 % of its manufactured tools. These tools are subjected to rigorous quality tests such as impact at room temperature and at -25°C, a 5000 V dielectric test with 2 kg of compression, insulation material adhesion, flame retardant properties with exposure to a flame for 10 seconds, and a 10.000 V dielectric test with the tools immersed in water or stainless steel spheres.
|Main Functions and Benefits||Injected body.
Electric insulation up to 1.000 V AC.
Product in accordance to IEC 60900.
Indicated to works in low tension, up to 1.000 V in alternating current and 1.500 V in direct current.
The Tramontina PRO insulated tools are subjected to several tests to meet requirements of IEC 60900: impact tests; dielectric tests; tests for adhesion of the insulating material; flame retardancy tests; electrical insulation tests.
Several tools for safe application in energized networks up to 1.000 V AC.
Used by professionals who work in danger places (energized networks and industrial installation).
Tools are produced and tested according specific standards.
IEC 60900 is an international standard that specifies the requirements of insulation tools approval and production. This standard is equivalent to EN 60900 European Standard.
|Recommendations for Use||
Wear safety glasses, gloves and others safety equipments according to the job.
Tramontina PRO insulated tools are manufactured to meet safety requirements of IEC 60900 standards. Such tools are indicated to be used in voltages up to 1.000 V AC and 1.500 V CC.
Reject any tool that shows damage such as, cracks, wearing, or signs of excessive use.
The double cover injection, with different colors, is designed to increase the operator's safety. If the external layer (red color) becomes damagedor worn down due to overuse, the internal layer (yellow color) will appear. This is a warning for the operator to reject and change the tool.
Don't change the original shape and dimension of tools.
Don't strike the tools unless they are designed forthis purpose.
Always use a wrench that corresponds to the size of screw or nut. These precautions will increase the tool's lifetime and the safety of your operation.
Always store the insulated tools in a clean and dry place.
Be aware of the established torque for each type of tool. Don't use levers or extension bars to reach higher torque values.
All the insulated tools IEC 60900 must be revised periodically. Store them in a place distant from sharped objects, to avoid any drill in the insulation.
Reject any tool that shows damage such as, wearing, or signs of excessive use.
Keep the cutting tools out of the reach of children.
Inspect visually 100% of the tools before each use, in order to verify the insulation within the following criteria:
* Insulation integrity (verification of cracks, holes, etc);
* Insulation adhesion on the metal parts (investigation of insulation displacement).
* Rigidity of the flaps / side flaps (where applicable).
* Readability of standard marking details;
Store the tools on places free of sharp or pointed objects in order to avoid perforations and damages to the insulation.
Discard tools that are showing any deficiency on the categories mentioned above.
Recertify the insulated tools according to internal company procedures.
Store the tools in a clean and dry place, in order to avoid tools under moisture for long periods.
|Certification||Product in accordance to IEC 60900.|
* You can compare up to 4 products per category.
Com a Tramontina, você sempre conta com a melhor solução para seu negócio. Preencha o formulário e solicite seu orçamento.
TRAMONTINA PRO MODULAR STORAGE SYSTEMS: TAILOR MADE FURNITURE FOR MECHANICAL WORKSHOPS.
Telefone de contato: 0800 642 5565
Horário: 7:15 às 12:00 e das 13:00 às 17:00.