Tramontina PRO line of tools and accessories for working at height is in accordance with the requirements of specific standards for this segment. These standards are mandatory, with national validity, and were created thinking about the security and health during all activities in industry, construction companies, or general service companies, where a fall risk is present. An activity is considered a working at height activity when it is performed over two meters from the ground. For tools, these regulation standards act on the accidents prevention generated from the tools falling, which must be prevented through the use of special procedures such as: tool tying, net usage, or any other method that avoids this potential risk. To avoid lowering others? opinions, use the Tramontina PRO tools at height system.
|Main Functions and Benefits||Heat shrink rubber body.
Nylon webbing with steel ring.
Used on tools with ends larger than location of the shrink loop, as an anchor point between tools and lanyards, preventing the tools falling when they are used at working at height.
Diameter capacity: 9 up to 19 mm.
Load capacity: 2.2 Kg.
|Recommendations for Use||
Wear safety glasses, gloves and others safety equipments according to the job.
All the working at weight accessories are tested according to their load capacity, to ensure its strength and safety during use.
-Avoid damaging care label during installation. It is normal for shrink loops slide along the straight portion of some tools, winch is why it?s important use the accessory on a tool with appropriate geometry.
Failure to heart evenly or over heating could cause heat shrink to tear.
Always use the smallest size of the shrink loop that will fit over the end of the tool.
Use on tools where ends are larger than location of the shrink loop.
Don't use on tools with lacking of appropriate geometry.
Store in a clean and dry place.
* You can compare up to 4 products per category.
Com a Tramontina, você sempre conta com a melhor solução para seu negócio. Preencha o formulário e solicite seu orçamento.
TRAMONTINA PRO MODULAR STORAGE SYSTEMS: TAILOR MADE FURNITURE FOR MECHANICAL WORKSHOPS.
Telefone de contato: 0800 642 5565
Horário: 7:15 às 12:00 e das 13:00 às 17:00.