Refrigerato Pass-Through, 1 glass door and 1 stainless steel door

Code 67681213

Refrigerato Pass-Through, 1 glass door and 1 stainless steel door, 0° +10°: Internal and external structure in AISI 304 stainless steel with a brushed finish. Ventilated refrigeration with forced air circulation. Chamber without evaporator or fan, with the single-block refrigeration unit encased in the top part (patented system). Automatic evaporation of water condensation. Automatic defrosting activated with hot gas (frost-free system). Walls are 75mm thick with high-density polyurethane insulation. Low energy consumption (up to 45.7% compared to the average standard). Low level of noise (only 47 dB). Automatic closing door. Adjustable plastic feet; will not deform; height of 120-150 mm. Capacity of 600 L. Includes 3 pairs of rails for GN.

Product Certified as OCP-0029, UL, Safety, INMETRO compulsory.

SUPPORT MATERIALS:
  • Folheto Folheto
  • Instruções Instruções

Product features

Main Functions and Benefits Operation temperature: 0°+10°C
External dimension: 750x930x2025mm
Internal dimension: 600x785x1440mm
Capacity: 700l
Power: 350W
Supply voltage: 220V, 60Hz

Recommendations for Use Avoid putting hot products in the refrigerator so as not to overload the motor, and also to prevent humidity from accumulating in the evaporator. Do not obstruct the sides when placing products to avoid compromising the ventilation cooling. Do not place products on the bottom or on the top beyond the red line. Try to minimize the opening of the door to avoid humidity accumulation in the evaporator and excessive temperature increase. Proceed to daily cleaning by removing all solid waste or spilled liquid. Periodically, perform a more thorough cleaning. First of all, disconnect the equipment. Empty the chamber completely and, if you find it necessary, remove brackets and grids to be washed in the sink. Wash the chamber with neutral soap and water and rinse carefully. It is possible to sanitize the chamber using water and vinegar. Avoid using degreasers or aggressive cleaning products on the most delicate parts, such as the electronic plate. Never use chlorine-based products, as they may damage stainless steel. WARNING: Do not use high pressure or water jets to clean the technical part, so as not to damage the components or affect equipment function.
Weight 140,00 kg
Length 750 mm
Width 930 mm
Height 2025 mm
Warranty 12 months